Lifts and Mounts 
There are a few designs of projector lifts available:
Micro Projector Lift
Scissor Lift
Revelation
AeroLift
Orbiter
Phantom

 The Micro Projector -

       At Viewing Height                          Extended for Service                   Flush (Hidden) In Ceiling
          

The Micro Projector Lift is small and convenient, just like the projectors it is designed to accommodate. It can be installed in an existing 2' x 2' ceiling opening without disturbing the ceiling framework. The projector’s “show” position can be set at any point with infinite adjustability, up to 48” extension. 35 pound lifting capacity.

The Micro Projector Lift utilizes the same exclusive 3-scissor design as Draper’s popular Scissor Lift but features a compact side-folding scissor. The load is lifted by two 1” wide Kevlar® straps. Safety belt provides extra protection. Closed height of lifting unit is only 5” tall (not including projector, mounting mechanism or closure), so a minimal amount of overhead ceiling space is required. Warranted for one year against defects in materials and workmanship.
Factory Installed Cables: Draper will factory install cables for RGBHV with BNC or 15pin HD connectors, S-Video, Composite and Component Video with BNC or RCA connectors, Serial Communication for projector control with DB9 connectors, CAT 5e, CAT 6, and HDMI. This option is available on the LCD lift, Micro Projector Lift, and Scissor Lifts. This option save installation time in the field since installer does not have to attach cables to the lift.
Can be independently operated using Draper's motorized lift controls.


 Scissor Lifts
Scissor Lift in Fully Extended "Service" Position                  Hides just like the MPL Lift
        

Now CE approved. Draper's Scissor Lift not only conceals your projector above the ceiling and sets it exactly where you need it for a presentation, it also brings it down to within easy reach for service. This projector lift offers three positions: store, show and service. The Scissor Lift stabilizes projector both laterally and front—to—back with 3 sets of scissors. Two series of lifts that vary in extension length to service position. SL Series range from 4' - 10'. SLX Series range from 11' - 17'. 350 lbs. lifting capacity.
Factory Installed Cables: Draper will factory install cables for RGBHV with BNC or 15pin HD connectors, S-Video, Composite and Component Video with BNC or RCA connectors, Serial Communication for projector control with DB9 connectors, CAT 5e, CAT 6, and HDMI. This option is available on the LCD lift, Micro Projector Lift, and Scissor Lifts. This option save installation time in the field since installer does not have to attach cables to the lift. Cable Flyer
Can be independently operated using Draper's motorized lift controls.


 Revelation Lift

The Draper Revelation permanently conceals the projector—and its noise—above the ceiling at all times.You won’t see or hear the projector—not before, during or after the show. You'll only see a motorized hinged door in the ceiling, finished in white. Has a dual first surface mirror system to reflect projector's light path onto the screen.

Available in two models: Revelation A and Revelation B both require only 13-5/8" of space above the ceiling, and both can be installed to match a 2' x 2' ceiling grid, or used with reveal-style grid ceilings (like Armstrong’s Silhouette-style grid system). The Revelation B gives more projector length space. These two models accommodate a wide variety of projectors, including those with offset lenses. Each model comes with or without an Environmental Airspace Housing.



 The Aero Lift

 

The AeroLifts are powered by strong tubular motors for a simplified design, and features a stabilizing arm which can be used for cable management. Built-in adjustability allows you to deal with job site conditions quickly and easily. The projector can be mounted flush to bottom pan, or with SMS Low Profile Mount. Can also be used to recess speakers, security cameras, videoconferencing cameras or document cameras. Can be independently operated using Draper's motorized lift controls.

3 Models Available

AeroLift 25 Has a lifting capacity up to 25 lbs. It installs easily between standard 2” thick ceiling joists on 16” centers. Closed position: 4" high x 12-1/2 " wide x 22-1/4 " long, not including projector, mounting bracket, ceiling closure or other accessories. (The 12-1/2" dimension can expand to 14" to meet joists that might be spaced further apart, or to compensate for joists that might not quite be 2" thick.) Vertical travel 20" (extension)

AeroLift 50 and 150 Have lifting capacities up to 50 lbs and 150 lbs respectively. Vertical travel 32" (extension) for both models.
Warranted for one year against defects in materials and workmanship.


 The Orbiter Lift


You won't see the projector until it rotates into place. Can be installed in an angled ceiling, wall or table. Uniquely versatile, ingenious design—fits in small cavities. Conceals projector and rotates it into "show" position at the touch of a switch or wireless transmitter. Two sizes available, Models A and B, to fit projectors up to 26 lbs. depending on projector size. The Orbiter can also be used for video conferencing cameras, speakers, etc.


 The Phantom


This compact lift hides in the ceiling. Reveals itself at just the right time. It quickly and quietly dips the projector out of the ceiling and into the "show" position. Can also be mounted in a table for when ceiling installation is not possible or wanted. Supplied with a universal projector bracket that allows for easy attachment of most projector models. Two sizes available, Models A and B, to fit projectors up to 26 lbs. depending on projector size, see the chart in the photos area at the top of this page. The Phantom can also be used for video conferencing cameras, speakers, etc.

Due to the multiple variables that could affect the overall installation of these
units, it is best that quote requests be sent to our office.  

Please send your quote request along with any drawings, specifications,
and other details to:

Advantek Casework and Visual Specialties, LLC
4057 Route 9 North, #266
Howell, NJ  07731
Phone:  732-414-1600         Fax:  732-414-1599
 email address:  sales@acvs-llc.com

OR

Please fill out the quote request form below.
Any supporting documents will help provide a better picture of your
requirements.

First Name:
Last Name:
Email:
Company:
Address Line 1:
Address Line 2:
City:
State:
Zip:
Phone Number:
Fax Number:
Your Request:
Your Request: